ATEN 宏正 成都 PE8216 20A/16A 16插座0U测量&开关型智能PDU电源分配器

20A/16A 16插座0U测量&开关型智能PDU电源分配器
PE8216

对个别电源插座和插座群组,执行远程电源插座控制(开、关、电源循环)
电源开启顺序 — 使用者可设定电源开启顺序和每个插座的延迟时间,以让设备可依适当的顺序开启
支持TCP/IP、UDP、HTTP、HTTPS、SSL、DHCP、SMTP、NTP、DNS、Telnet、Auto Sense、Ping、SNMP V1、V2&V3
主动过载保护 — 自动关闭造成电流过载的*后一组插座

ATEN宏正推出NRGence新一代绿能电源分配器(eco PDU),能够有效提高数据中心能源使用效率。NRGence PE8216 eco PDU电源分配器为支持16组AC电源插座的智能型电源分配器,并提供各种IEC插座配置。先进的PE8系列产品具备NRGence的主动过载保护功能,当电流过载时,能够自动切断导致过载的*后一个接入的插座电源。

NRGence eco PDU电源分配器既保障了数据中心内IT设备(服务器、储存系统、KVM多电脑切换器、网络设备、串口数据设备等)的安全、集中、智能化的电源管理(电源开、关及循环),又能够通过感应器检测数据中心的环境状况。

NRGence eco PDU电源分配器在整合实时电源测量的同时,也提供远程电源控制功能,从而使用户能够从*地方通过TCP/IP连接远程控制电源分配器和监测电源分配器或回路层级或插座层级的IT设备电源状态。

NRGence eco PDU电源分配器可让您单独设置每个插座的电源状态,对每台设备进行开关切换。同时,能为您提供多样的电源分析报告,可根据部门及位置提供精确的电流、电压、功率及功耗测量并即时显示。本产品安装操作快捷简单:将线缆插入正确的端口即可,并使用人性化的基于浏览器界面进行配置与管理。NRGence eco PDU电源分配器的固件可通过网络进行更新,只需从我们的网站下载*版本的固件即可确保您的设备拥有*的功能。

NRGence eco PDU电源分配器支持*第三方V3 SNMP管理软件,以及NRGence eco Sensors(能源管理软件)。eco Sensors能源管理软件为用户提供了管理多个设备的简便方法,通过使用直观人性化的图形用户界面,可让用户配置PDU设备并监测其连接设备的电源状态。

由于其先进的安全性及易操作性,NRGence eco PDU电源分配器提供*为便捷、可靠及节约成本的方式,可让您对多台电脑设备进行远程电源管理,并*有效配置电力资源。

物品清单
1 x PE8216G eco PDU电源分配器
1 x 标准机架安装套件
1 x 安装光盘(说明书, 能源管理软件)
1 x 快速安装指南
/
Remote power outlet control (On, Off, Power Cycle) by individual outlets
Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the outlet level (PE8108 / PE8208)
Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping, Telnet
Power-on sequencing – users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order

As part of its NRGence line, ATEN has developed a new generation of green energy power distribution units (eco PDUs) to effectively increase the efficiency of data center power usage. The NRGence PE8216 eco PDUs are intelligent PDUs that contain 16 AC outlets and are available in various IEC socket configurations. Models in the advanced PE8 ranges feature NRGence´s proactive overload protection, which automatically powers off the last outlet that caused the current overload.

NRGence eco PDUs provide secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center´s health environment via sensors.

NRGence eco PDUs offer remote power control combined with real-time power measurement — allowing you to control and monitor the power status of devices attached to the PDUs, either at the PDU device, bank, or outlet level, depending on the model, from practically any location via a TCP/IP connection.

The power status of each outlet can be set individually, allowing users to switch each device On/Off. The eco PDU also offers comprehensive power analysis reports which can separate departments and locations, providing precise measurements of current, voltage, power and watt-hour in a real-time display. Installation and operation is fast and easy: plugging cables into their appropriate ports and user-friendly browser-based configuration and management is all that is entailed. Since the eco PDU firmware is upgradeable over the Net, you can stay current with the latest functionality improvements simply by downloading updates from our website as they become available.

NRGence eco PDU supports any 3rd party V3 SNMP Manager Software and NRGence eco Sensors (eco PDU Manager Software). eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.

With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable, and most cost effective way to remotely manage power access for multiple computer installations and allocate power resources in the most efficient way possible.

Package Contents
1x PE8216 eco PDU
1x Standard Rack Mount Kit
1x CD-ROM (Manual, eco Sensors Software)
1x Power Cord
1x User Instructions
/
接口
支持10/100M以太网络端口
支持TCP/IP、UDP、HTTP、HTTPS、SSL、DHCP、SMTP、NTP、DNS、Telnet、Auto Sense、Ping、SNMP V1、V2&V3
支持两层账户/密码安全机制、IP/MAC过滤、128位元SSL、RADIUS
支持eco Sensors能源管理软件、浏览器(IE、Firefox、Chrome、Safari)

测量
可测量监控整个PDU或插座的电源状态
环境监控-支持外接温度/温度&湿度感应器,以监控机架的温度及湿度
提供电流、电压、功率、功耗、温度及湿度临界值设定功能
支持门禁感应器

插座开关控制
可对个别电源插座或群组插座进行远程控制(开启、关闭、循环)
支持PDU插座群组
支持多电源控制方式-Wake on LAN,System After ACBack,Kill the Power
电源开启顺序-用户可制定电源开启顺序及每个插座的延迟时间,以支持设备按适当的顺序开启
主动过载保护-自动关闭引发电源过载的*后一个接入的电源插座
/
Connections
Support 10/100Mbit Ethernet Interface
Support TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, and SNMP V1,V2&V3
Support 2-level account/password security, IP/MAC filter, 128 bit SSL, RADIOUS
Support : eco Sensors, Browser ( IE, Firefox, Chrome, Safari )
Metering
PDU and outlet level power metering and monitoring
Environment monitoring — supports external temperature/temperature & humidity sensors for rack temperature and humidity monitoring
Current, voltage, power, power dissipation, temperature, and humidity metering and threshold level setting
Support door sensor
Outlet Switch Control
Remote power outlet control (On/Off, Power Cycle) by individual outlets and outlet groups
Outlet group support at the PDU
Supports multiple power control methods — Wake on LAN, System After AC Back, Kill the Power
Power-On sequencing — users can set the power-on sequence and delay time for each outlet to allow equipment to be powered on in the correct order
Proactive overload protection(POP) — automatically powers off the last outlet that caused the current overload
/

Function PE8216B PE8216G
电子特性
额定输入电压 100 – 240 VAC 100 – 240 VAC
*输入电流 *高 20A;16A(UL降规) *高 16A
输入频率 50-60 Hz 50-60 Hz
输入接口 NEMA 6-20P IEC 60320 C20
输入功率 4160 VA(*高);3328 VA(UL降规) 3680 VA(*高)
插座类型 总额:14 x IEC320 C13 + 2 x IEC320 C19
回路 1-1:出口 1 – 8,7 x C13 + 1 x C19
回路 1-2:出口 9 – 16,7 x C13 + 1 x C19
总额:14 x IEC320 C13 + 2 x IEC320 C19
回路 1-1:出口 1 – 8,7 x C13 + 1 x C19
回路 1-2:出口 9 – 16,7 x C13 + 1 x C19
额定输出电压 100 – 240 VAC 100 – 240 VAC
*输出电流 (插座) C13:1*(*高);12A(UL降规)
C19:20A(*高);16A(UL降规)
C13:10A(*高)
C19:16A(*高);TUV 降规 1*(*高)
*输出电流 (回路) 20A(*高);16A(UL降规) 16A(*高);TUV 降规 1*(*高)
*输出电流 (总额) 20A(*高);16A(UL降规) 16A(*高);TUV 降规 1*(*高)
断路器 1 x 20A 无熔丝断路器 1 x 16A 无熔丝断路器
计量 回路层级电流、电压、VA、PF、KWh 监控 回路层级电流、电压、VA、PF、KWh 监控
插座开关
环境感应器连接端口 4 4
测量精度 电压范围:100VAC ~ 250VAC +/-1%
功率范围:100W ~ *功率 +/- 2%
电流范围:0.1A~1A +/- 0.1A,1A~20A +/-1%
电压范围:100VAC ~ 250VAC +/-1%
功率范围:100W ~ *功率 +/- 2%
电流范围:0.1A~1A +/- 0.1A,1A~20A +/-1%
机体属性
尺寸 (长 x 宽 x 高) 132.48 x 6.60 x 4.40 cm
(52.16 x 2.6 x 1.73 in.)
132.48 x 6.60 x 4.40 cm
(52.16 x 2.6 x 1.73 in.)
重量 3.88 kg ( 8.55 lb ) 3.88 kg ( 8.55 lb )
电源线长度 1.6 m 1.6 m
环境
温度 (操作 / 存放) 0 – 50°C / -20 – 60°C 0 – 40°C / -20 – 60°C
湿度(运行及储存) 0–80% RH, 无凝结 0–80% RH, 无凝结
兼容协议
EMC认证 FCC Part 15 Class A,其他视要求而定 CE,其他视要求而定
安全认证 TUV-CB,其他视要求而定 CE-LVD,其他视要求而定
附注 对于一些机架式产品,请注意标准物理尺寸WxDxH,其使用LxWxH来表示。
Function PE8216B PE8216G
Electrical
Nominal Input Voltage 100 – 240 VAC 100 – 240 VAC
Maximum Input Current 20A Max; 16A(UL de-rated) 16A Max
Input Frequency 50-60 Hz 50-60 Hz
Input Connection NEMA 6-20P IEC 60320 C20
Input Power 4160 VA(Max); 3328 VA(UL de-rated) 3680 VA(Max)
Outlet Type Total: 14 x IEC320 C13 + 2 x IEC320 C19
Bank1-1: Outlet 1 – 8; 7 x C13 + 1 x C19
Bank1-2: Outlet 9 – 16; 7 x C13 + 1 x C19
Total: 14 x IEC320 C13 + 2 x IEC320 C19
Bank1-1: Outlet 1 – 8; 7 x C13 + 1 x C19
Bank1-2: Outlet 9 – 16; 7 x C13 + 1 x C19
Nominal Output Voltage 100 – 240 VAC 100 – 240 VAC
Maximum Output Current (Outlet) C13: 1* (Max); 12A(UL de-rated)
C19: 20A (Max); 16A(UL de-rated)
C13: 10A (Max)
C19: 16A (Max); TUV De-rated 1*(Max)
Maximum Output Current (Bank) 20A(Max); 16A(UL de-rated) 16A(Max); TUV De-rated 1*(Max)
Maximum Output Current (Total) 20A(Max); 16A(UL de-rated) 16A(Max); TUV De-rated 1*(Max)
Breakers 1 x 20A Non-Fuse breaker 1 x 16A Non-Fuse breaker
Metering Outlet Level Current, Voltage, VA, PF, KWh Monitoring Outlet Level Current, Voltage, VA, PF, KWh Monitoring
Outlet Switching Yes Yes
Environment Sensor Ports 4 4
Metering Accuracy Voltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Voltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1%
Physical Properties
Dimensions (L x W x H) 132.48 x 6.60 x 4.40 cm
(52.16 x 2.6 x 1.73 in.)
132.48 x 6.60 x 4.40 cm
(52.16 x 2.6 x 1.73 in.)
Weight 3.88 kg ( 8.55 lb ) 3.88 kg ( 8.55 lb )
Power Cord Length 1.6 m 1.6 m
Environmental
Temperature (Operating / Storage) 0 – 50°C / -20 – 60°C 0 – 40°C / -20 – 60°C
Humidity (Operating & Storage) 0 – 80% RH, Non-Condensing 0 – 80% RH, Non-Condensing
Compliance
EMC Verification FCC Part 15 Class A, Others by Request CE, Others by Request
Safety Verification TUV-CB, Others by Request TUV-CB, CE-LVD, Others by Request
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.